The easiest most vibrant way to print custom designs on T-shirts, hoodies, tote bags, and more.
Review Art requirements & information.
DTF Transfer Turnaround Time is 1-2 business days.
DTF Gang-Sheet Application FAQ
Should I cut the designs apart before pressing?
Cut between designs so you can position each transfer separately. Keep your cuts clear of the printed artwork.
What should I check before pressing?
Check design size, orientation, placement, and spacing before applying heat. Position the printed side against the garment, with the carrier film facing up. Most use a cover sheet for pressing. The cover sheet is not required for the pre-press or when applying the transfer( recommended), but must be used on the final press.
What temperature should I use?
For most garments, use 302°F within a range of 300–305°F. For polyester, use 280–285°F. Follow the transfer application instructions for the initial pressing time and pressure.
When should I peel and press again?
Our media is hot peel: remove the carrier film immediately after the first press, then perform a second press for 5 seconds with a cover sheet. A pre-press of 5sec is also recommended.
What about curing?
Follow the complete pressing workflow, including the 5-second second press.
How should I care for the finished garment?
Wash inside-out in cold water. Hang dry or tumble dry low, following the garment's care label. Do not iron directly on the design.
